 |
 |
 |
How
long I need to change battery? |
| The
battery life will depend on the time you use every day, normally
the battery can be use almost 2-3 months in two alkaline AA
type batteries. |
| |
| |
Why
the keyboards have no function after I change or replace battery? |
| That
is ID code loss problem; you just follow the ID setting procedure
to setup again. |
| |
| |
Why
the loss character problem happen when I typing? |
| That
have many reasons will be cause this problem, please follow
below check list to find out the problem and solve it. |
a.
Did your battery life out of the date?
Change to new two alkaline AA type batteries
and do the ID setting again. |
b.
Did other similar Radio Frequency product beside your computer?
 Redo
the ID setting again.
Try
to move your keyboard receiver away another receiver to increase
the anti-
interference ability, of cause we
design this amazing ability in-side our product but we
can not guarantee it have 100% ability
from any interference source. Note. Please
kindly to check the specification
in the effective range in radio transmit, that mean
you
can not move your receiver out this
range with your keyboard.
c. Did you put receiver near your monitor or some of none
antimagnetic speaker?
Some of monitors have not good EMI protect
enough, special is old style CRT type
monitor which is fabricate before year
2000, so please move your receiver away your
monitor at less 10cm.
Move receiver away from none antimagnetic
speaker at less 10cm too. |
| |
| |
Keyboard
will not Sync by ID setting |
Remove
the batteries from the keyboard and press keys on the keyboard
for
approximately one minute.
This will clear out the capacitors. |
| Make
sure the receiver has connected with computer properly. |
|
Follow
the ID setting process to reset the ID code again. |
| NOTE:
You may need a pencil tip or other small tip to press the
connect button. |
|
